Detailed Product Description
P002 Teflon skived sheet Specifications: 1) Skived PTFE sheet material: 100% PTFE resin 2) Temperature limit: -100 ~ 250°C 3) Pressure limit: 20Mpa 4) Main applications: processing spacers and irregular parts used for sealing, insulation and antisepsis 5) Surface: slick, not allowed to contain crack and air bubble 6) Thickness: 0.2 - 10mm 7) Dimensions (W x L): 250 x 250mm -- 1,500 x 8,000mm 8) Voltage resist: 10KV/mm P001 PTFE Molded Sheets Features: 1) Material: suspended PTFE resin 2) Corrosion resistant 3) Unloaded temperature range: -180 ~ +260°C 4) Lowest friction coefficient in known solid materials 5) Used in anti-corrosive liner materials and sealed liners, bearing slides, guide rails and electric isolators P003 PTFE Rods Two types of PTFE rods are available. The rods of diameter 4-9mm are extruded from dispersion PTFE resin, those of diameter 10-50mm are plunger-extruded from suspension PTFE and that of diameter above 50mm die-pressed. Pressed rod, extruded rod, die-pressed rod, diameter 10 mm-50mm Specifications: 1) Density: 2.1-2.3g/cm3 2) Temp resist: -180-200 Celsius degrees 3) Tensile strength: above 15Mpa 4) Elongation at break: above 200% 5) Outer diameter: 20-300mm 6) Length: 50-300m 7) Special sizes could be ordered 8) For 1000mm length molded rods, outer diameter must be above 60mm P004 PTFE Tubes Specifications: 1) Density: 2.1-2.3g/cm3 2) Temp resist: -180-200 Celsius degrees 3) Tensile strength: above 15Mpa 4) Elongation at break: above 200% 5) Outer diameter: 20-300mm 6) Wall thickness: 5-100mm 7) Length: 50-300mm 8) Special sizes could be ordered
View